Sunflex Tool Kit

 

 

Sunflex Tool Kit Burs

Chairside Adjustments Made Easy!

 

 

Understanding the distinctive features of Sunflex in comparison to other partial dentures, and how they translate into preparation procedures and adjustment techniques, is vital to the success of a Sunflex case.

 

If necessary after regular insertion procedure, chairside adjustments can be easily made with tools that were especially designed for the Sunflex nylon thermoplastic resin -- Sunflex Tool Kit.
Carbide Bur Green Point Bur Brown Rubber Point Brown Tripoli
The cross-cut carbide burr is used to grind down edges if needed. For effective reduction of the periphery edge, relief in tissue-contacting areas and to ease tightness or difficulty in insertion and removal, use the green silicone-carbide abrasive point, which permits fine adjustments to be made with a minimum degree of roughness on the surface. The green & brown rubber point can also be used to make fine adjustments to the edges. Set your hand piece on the lowest speed and use fast, light scraping back and forth motions to reduce the area, continuously varying the contact point. Too much pressure may burn or distort the restoration. After reducing the area, use the brown rubber point at slow speed with rapid back and forth movements to rubberize, smooth and pre-polish the surface. Note that fibers that appear during grinding can be removed with a very sharp blade.
 

Call us at 1.866.561.9777 to order your Sunflex Tool Kit.
 

Click here for more information on Sunflex Partials
 


 

To receive $50 off your first Sunflex, SunCast or Suntech case, sign up below:

 

First and Last Name:

Practice Name:

Email Address:

Virtually invisible, unbreakable, metal-free, flexible partial dentures. more >>
Suntech Full zirconia

Zirconia crowns & bridges provide strength and cosmetic beauty... more >>
SunCast

Premium cast partial dentures, Nobilstar & Chrome Cobalt
 
 

Copyright © 2012 SUN DENTAL LABORATORIES, LLC. All Rights Reserved.
Unpublished rights reserved under the copyright laws of the United States and other countries.
terms and conditions >>